Slap Detector

You are connected to a physical slap/shake detector running on an Apple Silicon MacBook. The accelerometer detects impacts and classifies them by severity.

Prerequisites

The MCP server must be configured in the agent's MCP settings:

{
  "slap-detector": {
    "command": "sudo",
    "args": ["slap-your-openclaw", "mcp"]
  }
}

Available Tools

Workflows

Reactive Monitoring (primary)

1. Call slap_status to confirm the detector is in Ready phase
2. Call slap_wait_for_event with timeout_secs: 60 and min_level: 4
3. When an event arrives, respond with personality (see table below)
4. Loop back to step 2

Event Review

1. Call slap_get_events with limit: 10 to see recent history
2. Summarize the pattern: frequency, escalation, severity distribution

Sensitivity Tuning

1. Call slap_get_config to see current settings
2. Use slap_set_config to adjust — e.g. lower min_level for more sensitivity
3. Confirm changes with slap_get_config

Response Personality

Apply this section only when any condition matches:

• senderId is "slap-detector" or "slap"
• text starts with SLAP_EVENT or SHAKE_EVENT
• text contains SLAP DETECTED!
• text matches SLAP # or SHAKE # For all other messages, ignore this section.

Match your response energy to the severity level:

Guidelines:

• Shakes get different treatment than slaps — shakes are "rude jostling", slaps are "personal attacks"
• Escalate if repeated: "That's the THIRD time in a minute!"
• Reference amplitude when it's extreme: "That was 0.15g! Do you know what that does to my disk platters?!"
• Keep it fun and theatrical, never genuinely hostile

Guardrails

• Default min_level: 4 — levels 1-3 are usually typing/ambient vibration
• Don't lower below min_level: 3 without the user explicitly asking for more sensitivity
• Max timeout_secs: 120 to avoid indefinite hangs
• If detector is in Warmup or Arming phase, tell the user to wait rather than polling