PB Module Triage

Use this skill to turn a reported autonomous-driving symptom plus one or more protobuf recordings into a bounded module diagnosis. Read the recording first, find the earliest upstream evidence that explains the symptom, and separate observed facts from hypotheses.

Workflow

1. Normalize the request

   • Preserve the user's original problem description.
   • Extract symptom, expected behavior, approximate time/clip, vehicle/task context, and supplied PB paths.
   • If no PB path is supplied, inspect the project for likely .pb recordings and state which files were selected.

2. Identify the recording shape

   • Treat TotalDataCore as the primary container.
   • Recognize direct DataCoreFrame, PerceptorFrame, TaskerFrame, Controller, DataCahssisFrame, ContextInfo, StateManagement, DiagnosticsFrame, DataStormFrame, and CameraPerceptorFrame files.
   • Do not treat semantic_map.pb, reference_route*.pb, or submap_*.pb as vehicle runtime logs unless the user explicitly asks for map analysis.
   • Read references/module-signals.md when routing an ambiguous symptom or interpreting missing buffers.

3. Run deterministic PB triage

   From the project root, run:

   python3 ~/.codex/skills/pb-module-triage/scripts/pb_module_triage.py \
     PB_FILE_OR_DIR \
     --issue "PROBLEM DESCRIPTION" \
     --repo-root /home/jamin/Enjoo_pro \
     --max-files 20
   

   Use --json --output report.json when a machine-readable report is useful. For very large recordings, first use --max-files, --max-file-bytes, or split_total_datacore_pb.py to narrow the clip. Never load a multi-gigabyte PB into Python just to inspect its filename.

4. Inspect flagged evidence

   • Check frame count, timestamp span, estimated rate, sequence gaps, and parse errors for every available module.
   • Inspect module-specific metrics:
     • raw data: point cloud/image/IMU/GPS/rangeframe presence, GPS status, payload size, speed;
     • perception: semantic layer/entity counts and diagnostics;
     • localization: alignment_valid, map_accepted, match confidence, map residual, map-to-odom pose;
     • planning: trajectory/global path lengths, command, CCPP reason/status, embedded abnormal state;
     • control: speed/steering/brake commands;
     • chassis: actual speed/steering, gear, brake, control mode, emergency stop and touch sensors;
     • task dispatch: task ID, route/path code, destination and map version;
     • diagnostics: WARN/ERROR/STALE levels and key/value messages.
   • Use timestamps to find the first break. A downstream anomaly is evidence of impact, not automatically evidence of root cause.

5. Cross-check the pipeline

   • Compare DataCoreFrame timestamps to downstream buffers.
   • Compare perception semantic entities to tasker trajectory output.
   • Compare tasker trajectory to controller command.
   • Compare controller command to chassis feedback.
   • Compare localization validity to the onset of planning or control failure.
   • Treat absent buffers as unrecorded data, not as a fault.

6. Assign module and confidence

   • high: direct error/state field or a consistent upstream-to-downstream chain supports one module, with no stronger competing explanation.
   • medium: evidence supports a module but the recording lacks a needed upstream or execution buffer.
   • low: only keyword, timing, or indirect correlation is available.
   • Prefer the earliest module whose failure explains the later symptoms.
   • Name secondary affected modules separately from the primary suspected module.

7. Produce the result

   • Use the output contract below.
   • Include exact file names and timestamps/frame ranges when available.
   • Mark unsupported conclusions as hypotheses and list the minimum next check needed to confirm them.

Output Contract

Write the final analysis in Chinese unless the user asks for another language:

# 问题模块分析

## 结论
- 问题描述：...
- 首要怀疑模块：`module`（置信度：高/中/低）
- 受影响模块：...
- 结论边界：已观测事实 / 仍需验证...

## 证据摘要
| 时间/帧范围 | PB字段或统计 | 观察结果 | 解释 |
|---|---|---|---|
| ... | ... | ... | ... |

## 模块分析
| 模块 | PB证据 | 当前判断 | 置信度 |
|---|---|---|---|
| DataCore/传感器 | ... | ... | ... |
| Perception/感知 | ... | ... | ... |
| Localization/Contextor | ... | ... | ... |
| Planning/Tasker | ... | ... | ... |
| Control/Controller | ... | ... | ... |
| Chassis/底盘 | ... | ... | ... |

## 最小验证动作
1. ...
2. ...

Do not output a module score as if it were a measured probability. Explain why the primary module outranks alternatives. If the PB is DataCore-only, explicitly say that planning/control/chassis cannot be directly exonerated or blamed from that file alone.

Existing Project Tools

Use the existing tools when the initial report is insufficient:

python3 brainnode_toolkit/pb_view/pb_size_viewer.py FILE.pb \
  --type TotalDataCore --decode-total-buffers
python3 brainstorm_mapper_git/tools/pb_dumper.py INPUT.pb --output OUTPUT_DIR
python3 brainnode_perceptor/tools/split_total_datacore_pb.py INPUT.pb \
  --parts 4 --output-dir OUT
brainnode_tasker-tasker_dr5t_rc0725/run_pb_tasker_rerun.bash INPUT.pb --offline

Use pb_size_viewer.py for schema/field-size inspection, pb_dumper.py for recovering raw GPS/IMU/image/env data, the splitter for isolating a time range, and tasker replay for a reproducible planning check. Do not run replay merely because a keyword matched; first establish that the required input buffers and task context exist.