Huawei Cloud OA Service Risk Inspection

Overview

Fetch tenant resource inspection results from the Huawei Cloud Optimization Advisor (OA), Config and SecMaster services, and generate an inspection analysis report.

Workflow

Copy the following checklist and track progress:

- [ ] Step 1: Environment check
- [ ] Step 2: Fetch OA risk inspection results
- [ ] Step 3: Fetch Config resource compliance results
- [ ] Step 4: Fetch SecMaster baseline check results
- [ ] Step 5: Convert raw results
- [ ] Step 6: Generate report
- [ ] Step 7: Clean up temporary files
- [ ] Step 8: Workflow summary

Step 1: Environment check

• MUST Check whether the Python programming language is installed
• MUST Check the Python third-party library dependencies, refer to requirements.txt
  • Refer to the command pip install --dry-run -r requirements.txt
  • Expect all packages to output Requirement already satisfied
  • IF Would install appears, install the third-party library dependencies listed in requirements.txt
• MUST Check whether the hcloud command-line tool is installed
• MUST Check whether the hcloud command-line tool has authentication information configured
• If any check fails, MUST report the missing items and fix guidance to the user, and terminate the workflow

Step 2: Fetch OA risk inspection results

Call the oa_risk_inspection.py script to fetch raw risk inspection results from the Optimization Advisor (OA), with the following requirements:

• Run oa_risk_inspection.py with --help to view its help manual
• Use the question tool to ask the user how to configure the command-line parameters for running oa_risk_inspection.py
  • MUST List the command-line parameter details, including: parameter name, required/optional, default value, parameter description, etc.
  • MUST Have the user provide the necessary command-line parameter values, otherwise the script cannot run
  • MUST Ask the user to confirm the parameter values for this step's script. MUST NOT reuse or carry over answers from previous steps without explicit user confirmation for this step

Step 3: Fetch Config resource compliance results

Call the config_compliance_inspection.py script to fetch raw resource compliance check results from the Config service, with the following requirements:

• Run config_compliance_inspection.py with --help to view its help manual
• Use the question tool to ask the user how to configure the command-line parameters for running config_compliance_inspection.py
  • MUST List the command-line parameter details, including: parameter name, required/optional, default value, parameter description, etc.
  • MUST Have the user provide the necessary command-line parameter values, otherwise the script cannot run
  • MUST Ask the user to confirm the parameter values for this step's script. MUST NOT reuse or carry over answers from previous steps without explicit user confirmation for this step

Step 4: Fetch SecMaster baseline check results

Call the secmaster_baseline_inspection.py script to fetch raw baseline check results from SecMaster, with the following requirements:

• Run secmaster_baseline_inspection.py with --help to view its help manual
• Use the question tool to ask the user how to configure the command-line parameters for running secmaster_baseline_inspection.py
  • MUST List the command-line parameter details, including: parameter name, required/optional, default value, parameter description, etc.
  • MUST Have the user provide the necessary command-line parameter values, otherwise the script cannot run
  • MUST Ask the user to confirm the parameter values for this step's script, especially --region_id. MUST NOT silently reuse the region ID given in Step 3 (or any answer from a previous step) — ask the user to confirm it again for this step even when the value is identical

Step 5: Convert raw results

Call the merge_inspection_results.py script to convert the raw results of the Config and SecMaster services into the OA inspection result format, and generate the merged data file, with the following requirements:

• Run merge_inspection_results.py with --help to view its help manual
• Use the question tool to ask the user how to configure the command-line parameters for running merge_inspection_results.py
  • MUST List the command-line parameter details, including: parameter name, required/optional, default value, parameter description, etc.
  • SHALL Based on the outputs of Step 2: Fetch OA risk inspection results through Step 4: Fetch SecMaster baseline check results, prepare the command-line parameters for merge_inspection_results.py, and have the user confirm them
  • MUST Show the user the complete prepared command line and request confirmation before running, even when parameter values match a previous step
• After the merge run, MUST review the merge log for Blacklist filtered out lines
  • WHY: the merge deduplicates Config / SecMaster items against OA via the blacklists under references/blacklists; filtered items do not appear in the final report, so without the log the page check items would seem to differ from the report
  • MUST Record the filtered-out items (name + status + blacklist reason) for the workflow summary in Step 8, listing them as the reason the final report excludes those Config rules / SecMaster baselines

Step 6: Generate report

Call the merge_report_generator.py script to generate the tenant inspection analysis report, with the following requirements:

• Run merge_report_generator.py with --help to view its help manual
• Use the question tool to ask the user how to configure the command-line parameters for running merge_report_generator.py
  • MUST List the command-line parameter details, including: parameter name, required/optional, default value, parameter description, etc.
  • SHALL Based on the output of Step 5: Convert raw results, prepare the command-line parameters for merge_report_generator.py, and have the user confirm them
  • MUST Show the user the complete prepared command line and request confirmation before running, even when parameter values match a previous step

Step 7: Clean up temporary files

Delete the temporary JSON files produced by Step 2: Fetch OA risk inspection results through Step 5: Convert raw results, with the following requirements:

• MUST Delete the following temporary JSON files (the 5 files produced in Steps 2-5):
  • oa_risk_inspection_results_<timestamp>.json (from Step 2)
  • config_compliance_inspection_results_<timestamp>.json (from Step 3)
  • secmaster_baseline_inspection_results_<timestamp>.json (from Step 4)
  • secmaster_baseline_inspection_stats_<timestamp>.json (from Step 4)
  • merge_inspection_results_<timestamp>.json (from Step 5)
• MUST NOT delete the final report artifacts (HTML and Excel) generated in Step 6: Generate report
• MUST List the full absolute paths of all deleted files in the workflow summary (Step 8)

Step 8: Workflow summary

Summarize the completion status of the workflow steps from Step 1: Environment check through Step 8: Workflow summary, with the following requirements:

• MUST Present the completion status in a table, whose header SHALL include: No., Step, Status, Remarks
• MUST Describe the final artifacts: list the full absolute paths of all files generated in Step 6: Generate report. MUST list the artifacts that actually exist after the run, and MUST NOT fabricate artifacts
• MUST List the full absolute paths of all temporary JSON files deleted in Step 7: Clean up temporary files
• MUST Check the logs of each step's scripts before writing the summary — this information is authoritative
• MUST List the items filtered out by the blacklist during Step 5: Convert raw results, read from the Blacklist filtered out log lines (item name + status + blacklist reason)
  • SHALL Present them as a separate "黑名单过滤项" (Blacklist-filtered items) row or sub-section in the summary table
  • WHY: the final report intentionally excludes these Config rules / SecMaster baselines; listing them lets the user reconcile page check items with the report and confirms the difference is by design, not a defect

Prerequisites

• Python >= 3.9
• hcloud >= 7.2.2

References

• Huawei Cloud Config Service Documentation
• Huawei Cloud OA Service Documentation
• Huawei Cloud SecMaster Service Documentation
• Huawei Cloud KooCLI Installation
• IAM Authentication Guide
• CLI Installation Guide — Local reference: hcloud CLI setup steps
• IAM Authentication Guide — Local reference: AK/SK and region configuration
• Verification Method — Local reference: environment and feature verification procedures
• Acceptance Criteria — Local reference: acceptance gate checklist