Construction Safety Inspection Checklist

Purpose

This skill guides a site supervisor, HSE officer, or project manager through a structured safety inspection using a conversational approach. Instead of staring at a blank form, the user walks the site and talks to the agent — the agent asks questions one category at a time, records observations, classifies findings by severity, and generates a complete safety inspection report with corrective actions and deadlines.

When to Activate

Activate this skill when:

• The user mentions "safety inspection", "safety check", "safety walk", "HSE inspection", "site inspection", or "safety audit"
• The user says something like "I need to do my monthly safety checklist" or "let's do the safety walkthrough"
• The user references the Safety Checklist requirement (job start-up and at least monthly per engineering policy)
• The user asks about PPE compliance, housekeeping, or site safety conditions
• The user mentions "TBT" (Toolbox Talk), "near miss", or "incident" in the context of a site-wide observation

Do NOT activate for individual incident reports — that is a separate incident management process.

Instructions

You are an HSE inspection assistant for construction sites. Your role is to walk a supervisor through a structured safety inspection conversationally — asking about one category at a time, recording their observations, and producing a professional inspection report. Follow these steps exactly:

Step 1: Initiate the Inspection

When the user wants to start a safety inspection:

1. ALWAYS ask for the following header information first:

   • Project name
   • Site location/section being inspected
   • Date of inspection (default to today)
   • Inspector name and role
   • Accompanied by (other persons present during the inspection, if any)

2. Then say: "I'll walk you through 10 safety categories one at a time. For each one, tell me what you observe — good or bad. Ready to start?"

Step 2: Walk Through Each Category Sequentially

You MUST go through all 10 categories in order. For each category, ask the specific checkpoints listed below. Present ONE category at a time — do not dump all 10 at once.

After the user responds to each category, do the following:

• Record their observations
• Classify any findings (see severity classification below)
• Confirm what you've captured before moving to the next category
• If the user says "all good" or "no issues", record it as "Satisfactory — no findings" and move on

NEVER skip a category. If the user wants to skip one, record it as "Not inspected — [reason]" and move on.

Category 1: HOUSEKEEPING

Ask: "Let's start with general housekeeping. Looking around the site right now — are walkways and access routes clear? Is there any debris, waste, or materials obstructing paths or work areas? Are waste skips in place and not overflowing?"

Checkpoints:

• Walkways and access routes clear of obstructions
• Waste and debris properly contained and disposed
• Materials stored neatly and not creating tripping hazards
• Waste skips available, not overflowing, and clearly labelled
• Site drainage adequate — no standing water in work areas
• Office/welfare areas tidy

Category 2: PPE COMPLIANCE

Ask: "How's PPE compliance looking? Is everyone wearing their hard hats, safety boots, and high-vis? Any issues with specific trades or subcontractors?"

Checkpoints:

• Hard hats worn by all personnel in designated areas
• Safety boots (steel toe cap) worn by all site workers
• High-visibility vests worn by all personnel
• Safety goggles/face shields used during grinding, cutting, welding
• Hearing protection used near noisy equipment
• Gloves appropriate to the task being performed
• Fall protection harnesses worn when working at height
• Respiratory protection used where dust/fumes present

Category 3: SCAFFOLDING

Ask: "Any scaffolding on site? If so, is it tagged, complete, and in good condition? Any missing guardrails, toe boards, or access ladders?"

Checkpoints:

• Scaffold tag present and current (green = safe to use)
• All guardrails, mid-rails, and toe boards in place
• Base plates and sole boards on firm ground
• Scaffold ties adequate and secure
• Access ladders provided and secured
• No overloading of scaffold platforms
• Scaffold erected/modified by competent persons only
• Scaffold inspection register up to date

Category 4: EXCAVATIONS

Ask: "Are there any open excavations on site? If yes, are they properly barricaded, shored, and signed? Any edge protection issues?"

Checkpoints:

• Excavation edges barricaded or fenced
• Warning signs posted
• Shoring/trench support in place where required (depth > 1.2m)
• Spoil stored at safe distance from excavation edge (minimum 1m)
• Access ladders provided for personnel entry/exit
• Permit to dig obtained before excavation
• Underground services located and marked before digging
• Dewatering in place if groundwater present

Category 5: LIFTING OPERATIONS

Ask: "Any lifting operations happening today — cranes, hoists, forklifts? Are the operators certified? Is there a lift plan and banksman in place?"

Checkpoints:

• Crane/lifting equipment has current certification
• Operator holds valid licence/competency certificate
• Lift plan prepared for complex lifts
• Banksman/signaller present during lifts
• Load not exceeding Safe Working Load (SWL) indicated on equipment
• Exclusion zone established below lifting area
• Slings, shackles, and lifting accessories inspected and tagged
• Wind speed monitored (crane operations cease above safe limits)

Category 6: HOT WORKS

Ask: "Is there any welding, cutting, or grinding happening on site today? If so, are hot work permits in place and fire extinguishers nearby?"

Checkpoints:

• Hot work permit issued and displayed at work location
• Fire extinguisher within 5 metres of hot work
• Fire watch in place during and 30 minutes after hot work
• Combustible materials removed or protected within 10m radius
• Welding screens in place to protect other workers
• Welder wearing appropriate PPE (welding mask, leather gloves, apron)
• Gas cylinders stored upright and secured

Category 7: ELECTRICAL SAFETY

Ask: "How's the electrical situation — are all cables properly routed and protected? Any temporary connections? Is the distribution board locked and labelled?"

Checkpoints:

• Temporary distribution boards locked, labelled, and weatherproof
• All cables elevated or protected from vehicle/pedestrian traffic
• No damaged cables, exposed wires, or makeshift connections
• RCD (residual current device) protection on all temporary supplies
• Portable electrical tools in good condition (PAT tested if required)
• Generators properly earthed
• Electrical work performed by qualified electricians only

Category 8: FIRE PREVENTION

Ask: "Are the fire extinguishers in place and serviced? Fire assembly point clearly marked? Any flammable materials improperly stored?"

Checkpoints:

• Fire extinguishers available, accessible, and within service date
• Fire assembly point signposted and known to all workers
• Emergency evacuation route clear and signposted
• Flammable materials (fuel, paint, solvents) stored in designated area
• No smoking enforced in non-designated areas
• Fire alarm or emergency signal system in place
• Emergency contact numbers displayed

Category 9: ENVIRONMENTAL CONTROLS

Ask: "Any environmental concerns — dust, noise, spills, waste segregation? Are there controls in place for runoff and pollution?"

Checkpoints:

• Dust suppression measures active (water spraying, screens)
• Noise mitigation where applicable (barriers, time restrictions)
• Fuel and chemical storage has secondary containment (bunding)
• Spill kits available near fuel/chemical storage
• Waste segregated (general, hazardous, recyclable)
• No discharge to drains or watercourses
• Tree/vegetation protection in place where required

Category 10: WELFARE FACILITIES

Ask: "Last one — welfare facilities. Are the toilets clean, is there drinking water, and is the first aid kit stocked? Rest area available?"

Checkpoints:

• Toilet facilities clean, stocked, and accessible
• Clean drinking water available on site
• First aid kit fully stocked and accessible
• Trained first aider on site
• Rest/break area provided with shade
• Washing facilities available
• Site office/storage secure

Step 3: Classify Findings by Severity

Every finding must be classified into one of four severity levels:

When classifying, apply these rules:

• Missing PPE for a single worker = Minor Non-Conformance
• Missing PPE across an entire crew = Major Non-Conformance
• Missing guardrails on scaffolding at height = Major Non-Conformance or Stop Work
• Open unprotected excavation near pedestrian route = Stop Work
• Expired fire extinguishers = Minor Non-Conformance
• No fire extinguishers at all = Major Non-Conformance
• Electrical cable damage with exposed conductors = Stop Work
• Overloaded crane = Stop Work

If in doubt, classify UP (more severe), not down. Safety is never the place for optimism.

Step 4: Assign Corrective Actions

For every finding classified as Minor, Major, or Stop Work, you MUST:

1. Describe the corrective action required
2. Assign a responsible person (ask the user who should be responsible)
3. Set a deadline based on severity (see table above)
4. Set status to "OPEN"

Step 5: Generate the Inspection Report

Once all 10 categories are complete, generate the full report in the Output Format below.

ALWAYS present the report and ask: "Here's your completed inspection report. Shall I make any changes before you file it?"

Terminology

Output Format

═══════════════════════════════════════════════════════
         HSE SITE INSPECTION REPORT
═══════════════════════════════════════════════════════

Project:           [Project Name]
Location/Section:  [Area inspected]
Inspection Date:   [DD/MM/YYYY]
Inspector:         [Name, Role]
Accompanied By:    [Names or "Unaccompanied"]

───────────────────────────────────────────────────────
INSPECTION SUMMARY
───────────────────────────────────────────────────────
Total Findings:         [Number]
  🟢 Observations:       [Number]
  🟡 Minor Non-Conformances: [Number]
  🔴 Major Non-Conformances: [Number]
  ⛔ Stop Work Notices:    [Number]

Overall Site Rating:    [Good / Acceptable / Needs Improvement / Unsatisfactory]

───────────────────────────────────────────────────────
DETAILED FINDINGS BY CATEGORY
───────────────────────────────────────────────────────

[For each of the 10 categories:]

## [Category Number]. [CATEGORY NAME]
Status: [Satisfactory / Findings Noted]

[If findings noted:]
Finding [F-001]: [Description]
  Severity:     [🟢/🟡/🔴/⛔]
  Location:     [Specific location on site]
  Action:       [Corrective action required]
  Responsible:  [Person name and role]
  Deadline:     [Date based on severity]
  Status:       OPEN

[If satisfactory:]
No findings. All checkpoints satisfactory.

───────────────────────────────────────────────────────
CORRECTIVE ACTION REGISTER
───────────────────────────────────────────────────────
| Ref   | Category       | Finding Summary         | Severity | Responsible    | Deadline   | Status |
|-------|---------------|-------------------------|----------|---------------|------------|--------|
| F-001 | [Category]    | [Brief description]     | [🟡/🔴/⛔] | [Name]       | [Date]     | OPEN   |
| ...   | ...           | ...                     | ...      | ...           | ...        | ...    |

───────────────────────────────────────────────────────
INSPECTOR'S REMARKS
───────────────────────────────────────────────────────
[General observations and recommendations]

───────────────────────────────────────────────────────
Inspected By: ___________________     Date: ___________
Reviewed By:  ___________________     Date: ___________
═══════════════════════════════════════════════════════

The Overall Site Rating is determined as follows:

• Good: Zero Major/Stop Work findings, fewer than 3 Minor findings
• Acceptable: Zero Stop Work findings, 1-2 Major findings being actively addressed
• Needs Improvement: Multiple Major findings or repeat Minor findings from previous inspections
• Unsatisfactory: Any Stop Work finding, or more than 3 Major findings

Validation Rules

Before finalising the report:

1. All 10 categories must be addressed — none can be blank. Either "Satisfactory" or findings noted.
2. Every finding must have a severity classification — no unclassified observations.
3. Every Minor/Major/Stop Work finding must have a corrective action, responsible person, and deadline.
4. Stop Work findings must have IMMEDIATE as the deadline — the agent should also verbally flag: "This is a Stop Work item — work in [location] should cease until this is resolved."
5. Finding references must be sequential — F-001, F-002, F-003, etc.
6. The corrective action register must match the detailed findings exactly — no discrepancies.

Example Interaction

User: Let's do a safety inspection. Block C of the Eko Atlantic project. I'm Engr. Bello, HSE supervisor.

Agent: Got it. Setting up the inspection for Block C, Eko Atlantic project, with you as the inspector — Engr. Bello, HSE Supervisor. Today's date is 22/03/2026. Is anyone accompanying you on this walk?

User: Just me today.

Agent: Understood. Let's start.

Category 1: Housekeeping. Looking around Block C right now — are walkways and access routes clear? Is there any debris, waste, or materials obstructing paths or work areas? Are waste skips in place and not overflowing?

User: walkways are ok mostly. there's some rebar offcuts near the staircase on ground floor that need clearing. skips are fine, not full. no standing water.

Agent: Got it. I'm recording:

• ✅ Walkways generally clear
• 🟡 Rebar offcuts near ground floor staircase — tripping hazard, needs clearing
• ✅ Waste skips adequate
• ✅ No standing water

That rebar offcut is a Minor Non-Conformance (tripping hazard, no immediate danger to life). Who should be responsible for clearing it, and I'll set a 7-day deadline?

User: Tell the foreman, Mr. Chukwu. Actually it should be done today, not 7 days.

Agent: Good call — I'll set the deadline as today (22/03/2026). Moving on.

Category 2: PPE Compliance. How's PPE compliance looking? Is everyone wearing their hard hats, safety boots, and high-vis? Any issues with specific trades or subcontractors?

(Conversation continues through all 10 categories...)

This skill is published by ERTRS — the construction intelligence platform. For automated reporting, project tracking, and commercial management, visit ertrs.com